BRECK further expands new to range

Published:  15 April, 2018

As part of its continual investment plans, LUMAG has made a further range expansion. This latest extension of the BRECK range covers 20 different applications with just three part numbers. Vehicles covered by the latest expansion include the popular Audi A4 and A5 (15- and 17- registrations respectively); Ford’s C-Max, Grand C-Max, Kuga, and Focus models; Volvo C70, S40, V40 and V50, and finally, the Mazda 6. These latest additions have further expanded LUMAG’s current catalogue, which now includes 445 part references.
www.lumagltd.co.uk

Related Articles

  • BRECK further expands new to range  

    As part of its continual investment plans, LUMAG has made a further range expansion. This latest extension of the BRECK range covers 20 different applications with just three part numbers. Vehicles covered by the latest expansion include the popular Audi A4 and A5 (15- and 17- registrations respectively); Ford’s C-Max, Grand C-Max, Kuga, and Focus models; Volvo C70, S40, V40 and V50, and finally, the Mazda 6. These latest additions have further expanded LUMAG’s current catalogue, which now includes 445 part references.
    www.lumagltd.co.uk

  • DENSO thermal range expands  

    DENSO has expanded its range of A/C part numbers for workshops. In total 23 new part numbers have been added, consisting of two drier cartridges, three pressure switches and 18 expansion valves. The range expansion covers a variety of applications from major manufacturers such as Audi, Fiat, Ford and Jeep. The new offering extends the range to provide 1,302 additional applications, linked to 36 OE part numbers. It provides independent aftermarket distributors and workshops a comprehensive selection of parts to meet growing demand. The new A/C parts can be found in the DENSO E-catalogue and TecDoc.
    www.denso-am.co.uk

  • Lumag’s brake pad range further expanded 

    Lumag has announced the latest range additions to its brake pads brand BRECK. This latest extension of the BRECK range, including additions for both passenger cars and commercial vehicles, sees the introduction of six new BRECK brake pads for no less than 19 vehicle applications including Mercedes V-Class and Vito W447 models, Mazda 6, Peugeot 4008, Nissan X-Trail and Qashqai, and Toyota Prius Plus, Rav IV (A3 & A4), Mirai and Auris.  These latest additions have helped Lumag’s current catalogue to further expand to include 442 part references.
    www.lumagltd.co.uk

  • New Klarius parts released 

    Klarius Products has introduced over 70 new references to its 10,000-plus part range. The Vauxhall Agila 1.2, Astra Turbo and Meriva 1.7 all receive new aftermarket exhaust systems. The Dacia Logan saloon also gains similar support, as well as the Skoda Yeti 1.2, 1.6 and 2.0. New mountings are in for a wide range of applications, incorporating the Jaguar S-Type 2.7D, Mitsubishi Shogun 3.2 DID, Mercedes C-Class, the Fiat Ducato and the E36 BMW M3. The full Klarius range can be accessed from the Klarius web catalogue.
    www.klarius.eu

  • Euro Car Parts boosts TURBOJETZT range  

    Euro Car Parts is preparing repairers for an inevitable uplift in turbo work after adding new references to the TURBOJETZT range. Remanufactured units are now available for popular vehicle models including VAG 1.6 litre turbo applications, 1.6 litre Peugeot petrol models (manufactured after 2009) and 2.2 litre Ford Transit vans (manufactured after 2012).
    Euro Car Parts has been distributing the TURBOJETZT range since 2010, with sales of more than 200,000 units since. Throughout the past eight years, 308 new part numbers have been introduced, adding to the 480 references the product was launched with.
    https://omnipart.eurocarparts.com/

Most read content


Search

Sign Up

For the latest news and updates from Aftermarket Magazine.


Poll

Where should the next Automechanika show be held?



Facebook


©DFA Media 1999-2018